Double Glazing Seal Repairs
When double-glazed window seals are broken, it can lead to damp and mould. This could cause damage to the frame and wall surrounding it and impact your health.
Fortunately, the majority of uPVC windows can be repaired using resealing, rather than replacement. A glazier will clean the frame and the glass of the window, apply a fresh bead and smooth it.
Water Leaks
Window seals are made to prevent water to stay out of your home. When they begin to wear out, water can get into your windows. Not only is a leaky window irritating but it can also cause expensive structural damage to your home's structure. It is crucial to spot the issue early and have it fixed by a professional before it gets worse.
Often, the source of your leaking windows isn't in the glass but on the frame and sill. A leak in this area is the most frequent indication of a failing window seal. This can be caused by damage to the seal caused by weather or age, worn out caulking or even a blocked drain resulting in an accumulation of water or ice.
Another indication of a failing window seal is the appearance of water between the panes of your double-glazed windows. Although, this isn't as dangerous as a leak since the water doesn't travel enough to get into your home. It does mean, however, that the inert gases that are sandwiched between your panes have leaked out. This can reduce the effectiveness of the insulation in your window.
Condensation in between the panes is another typical sign of a failed seal. This may be caused by an ineffective window seal or it could be due to the humid climate of your home or an issue with the glass. It's not just annoying however, the condensation could result in mildew and mould growth within your home. This can be difficult and expensive.
It's time to check your double-glazed windows if observe these signs. The repair or replacement of windows will safeguard your home from water leaks, cut down on costs for energy, and also eliminate draughts. It's a small cost to provide your family with safety and comfort. Contact Thompson Creek Window to discuss your options for window seal repair or replacement. Our skilled professionals are here to assist! We provide assistance to homeowners throughout the Mid-Atlantic.
Condensation
A damaged double-glazing seal could let water in the space that is used for insulation. This water can cause fogging or misting within the window panes.
If you see condensation in your home, it's time to contact an expert in double glazing repair. Condensation is a sign that the seal created at the factory has been damaged and moisture is getting into the gap between the insulated and non-insulated.
Condensation can be caused by a number of reasons, but it is usually the result of gaskets that are not properly fitted, sealants or insulation within the uPVC frame of the windows. There are several options for repairing double glazing seals However, it is crucial that the new seals are correctly size to ensure a perfect seal and a tight fit.
Gaskets are generally made from polyurethane. It is a material that can be used to close gaps between double-glazed units. These are designed to be long-lasting but they are susceptible to deterioration in time because of wear and tear as well as exposure to different temperatures and weather conditions throughout the year.
As double glazing Stoke Newington passes the foam can shrink or crack over time. This could lead to cracks in the seal and allow moisture to seep into the double-glazed window. This can cause condensation and decrease in energy efficiency.
One solution to this problem is to have the windows sealed. This is not a sure fix as it will only remove the existing condensation, and not address the root issues that cause the double-glazed window to leak or create condensate.
A professional who can offer an insurance-backed guarantee should replace your windows completely. If the company fails, you are still covered by insurance. It's worth mentioning that the warranty on windows replacements should be at least 10 years.
Misting
As the fall months get closer it's a good idea to make sure that your double glazing seals are in good condition. Window seals that are damaged or worn out do don't just affect the insulation properties of your windows but can also cause damp, mold and condensation. It is crucial to fix any issues with your double-glazed windows as soon as possible to avoid further damage and save on energy costs.
A standard double glazed window is made up of two glass panes held together by an internal space filled with gas. The outer sealant layer fills the gap between uPVC frames and the glass. This is essential to maintain the air-tight sealing that keeps cool and warm air separate in your home which will save you money on heating costs. Unfortunately, over time, these seals can be damaged due to aging, weather conditions or even poor installation. After this the encapsulation formula that makes your double-glazed windows so efficient can begin to lose its effectiveness.
If left unchecked leaks, damaged seals, or other issues can lead to condensation and damp which can not only affect the appearance of your windows but can also affect your health. Mold and damp not only cause damage to your walls, floors and ceilings but can also cause irritants and allergens within your home that could be harmful to your health and your family's health.
One of the most frequent problems that can arise with your double glazing is misting in between the panes. This happens when moisture is absorbed in the insulated part of your windows. It isn't easy to fix without professional double glazing repair.
There are DIY methods of tackling this issue, however, we'd recommend against this because it's not just risky but also very hazardous and destructive to your windows. These methods involve drilling holes in your glass units and then using chemicals to get rid of the fog & condensation. This can cause many problems, most notably exposing your windows to water damage that could ruin the unit completely.
Professional glaziers possess the knowledge, tools and experience needed to properly seal your uPVC frames and give you long-lasting results. They can also provide tips on how to maintain your uPVC window to avoid future problems.
Draughts
A draft coming through your window means that the sealant is likely to have deteriorated. It should be repaired or replaced. This will block cold air from getting into your home. It will also improve efficiency in energy use, decrease heating costs, and improve the comfort.
It is important to note that some draughts are not caused by the window seals but rather from the gap between the frame of the bricks. In some cases it may be possible to fix this by caulking the gap. However, if this method is not successful it will require resealing professionally.
When the sealant on windows with double glazing begins to degrade, it allows for water ingress and can cause dampness or even mold in certain instances. This can then have a negative impact on health and may be detrimental to the property. It is essential to address any water ingress issues when you spot them. If your windows are still covered by a guarantee, it is worth checking with the company that you purchased windows from, since they could cover the cost of the repairs.
It is important to determine whether the windows are covered under warranties. Some companies offer lifetime warranties but others only provide 10 years. If your double glazing is under warranty, it's worth contacting the company you purchased them from as soon as you can and providing them with the details of any issues that you're experiencing. It is recommended to do this in person, or via mail or email, to ensure that all information is documented and clear.
It is also worth noting that draughts can be usually caused by defective hinges, and not due to a lack effective seals. The hinges close the window sash which is the part you open. If they're not oiling them regularly and become stiff, they may develop. This can create an opening between the sash and the frame which could allow cold air to enter. This issue can be resolved by replacing the hinges, without affecting window seals.